How to Maintain Your Jetted Tub | America's Preferred Home Warranty Skip to main content

How to Maintain Your Jetted Tub

Everybody loves to soak in a hot bath, especially if it happens to be in a jetted tub. Those extra goodies, though—they come with a little extra maintenance.

To help keep those jets running in good condition, you’ll want to perform these steps at least once every four months with rare use, or monthly with frequent use.

  1. Fill the tub with hot water to a few inches above the jets and add about 2 cups of vinegar.
  2. Run the jets on high for 10 to 15 minutes to cycle the solution through.
  3. Turn off the jets and empty the tub.
  4. Fill it again to the same level as before (only hot water this time) and run the jets on high for another 10 to 15 minutes.
  5. Turn off the jets and empty the tub.
  6. Sprinkle a healthy amount of baking soda over everything, let it sit for a few minutes, and then use a damp cloth to scrub everything down. Use a toothbrush to gently brush any remaining build-up from the nozzles. Don’t forget to remove the air-intake cover and give it a good soapy brushing, too, then rinse it and replace the cover.
  7. Rinse everything thoroughly and enjoy your nice clean jetted tub!

Ah, the bubbly life. Enjoy your newly maintained jetted tub!

Call 866.794.0875 to get a home warranty today, or visit APHW.COM for more information!

Let us know your thoughts on FacebookLinkedInTwitter or Instagram!